918博天堂·(中国区)首页

浙江江山市918博天堂化工有限公司

二十年专注印花材料研发、生产、销售

热搜关键词:
印花胶浆、印花水性墨、印花粘合剂、固浆、增稠剂、发泡浆
金葱浆系列

金葱浆系列

Glitter Paste Series

名称Name
用途及特点Purposes and Characteristics
使用方法
Usage
BE金葱浆
BE glitter paste
主要用在闪光片的粘合上,网印织物图案轮廓清晰,光亮,柔软不粘,牢度好。
Mainly used in the flash chip bonding, clear outline of screen printing fabric pat terns, bright, soft and sticky, good fastness.
金葱浆60%,闪片40%,混合搅匀,就可直接用30-40目网版印刷在织物上,为了使比较薄透的布料不渗透布底,最好用透明浆或者其它浆料打底一次再印闪片,待自然干燥后再以压烫机或者烘炉机150℃压烫或者过炉,得出理想的光泽效果。
Glitter paste 60%, flash chip 40%, mix stir and can directly print on the fabric by 30-40mesh screen. In order to prevent the impermeability of thin and transparent fabric, it’s better to bottom by transparent paste or other paste and then print flash pieces. After natural drying, pressing by pressing machine or oven at 150 and obtain ideal gloss.
BE金粉粘合剂
BE gold powder adhesive
适用于铜金粉用,抗氧化,不发黑。
Applicable to copper powder, antioxidant, no black.
先按照一定的比例将铜金粉和BE金粉粘合剂搅拌均匀,用40-80目网版印刷。如果想要金粉有更好的水洗牢度,可在浆料中加BE868A-交联剂1.5%,再晾干后130℃下烘培3分钟。
Stir the copper powder and BE gold power adhesive according to a certain proportion and print by 40-80mesh screen printing. If you need better washing fastness of the gold power, you can add 1.5% BE868A cross-linking agent and bake 3 minutes at 130 after drying.
BE七彩浆
BE colorful paste
使用于棉混纺织物、绒布的金银片、镭射片、七彩片的印花。
过往性好、成膜透明、牢度好、金葱片不易脱落。
光泽好、闪烁耀眼。
Use for the printing of cotton blended fabric, velvet gold and silver films, laser films, printing of colorful films.
Good past performance, transparent film, good fastness, glitter pieces are not prone to fall.
Shiny, glittering
用洒金方法印花工艺应在印好后的织物上立即将葱片洒下,烫压防止不需洒金的地方沾上金葱片。
烘培温度在130-150℃时间为2分钟。
Immediately sprinkle the slices by sprinkling printing process, pressing to prevent the golden slices on other places.
The baking temperature is at 130-150, for 2 minutes.

24小时资讯热线:

0570-4210738/4212038

首页            走进918博天堂            产品中心            印花样板            新闻中心           联系我们
918博天堂化工.com
浙icp备2022007127号-1
会员登录
登录
其他账号登录:
留言
回到顶部