名称Name | 用途及特点Purposes and Characteristics | 使用方法 Usage |
BE600高光牛仔浆白色 BE600高光牛仔浆透明 BE600 high-gloss denim paste white BE600 high-gloss denim paste transparent | 适用于牛仔布、化纤布。 可耐普通石磨、酵素洗及喷砂，具有良好的牢度和手感。 Applicable to denim, polyester fabric Resistant to ordinary stone, enzyme washing and sand blasting, with good fastness and feel. | 本品使用前先配合1%-2%BE-868A交联剂，充分搅拌，用后随时封闭。 勿与其它类型水性墨混合使用，以免凝胶，多色套印时，需浆表面干燥后再进行下一颜色印刷。 印刷完毕后应及时清洗网版，否则会因水性墨粘着性太好，造成网版无法使用。 Before use, fully stir with 1%-2%BE-868A cross-linker and close after use. Do not mix with other types of water-based ink to avoid gel; during multi-color overprint, make the next color printing after the drying of paste surface. Timely clean the screen after the printing; otherwise it will result in unavailable screen caused by the superior water-based ink adhesion. |
BE217高档水性PU白色油墨 BE219高档水性PU透明油墨 BE217 high-grade PU white ink BE219 high-grade PU transparent ink | 适用范围广：皮革、牛仔布、化纤布均可应用。 特别适用于高强度酵素洗，石磨及精细条的牛仔布印刷。 Wide range of applicable: leather, denim and chemical fabric are applicable Especially suitable for high-strength enzyme wash, stone mill and fine denim printing. |
|
BE801水性尼龙白色油墨 BE801水性尼龙透明油墨 BE801 water-based nylon white ink BE801 water-based nylon transparent ink | 主要用于普通尼龙布，防水尼龙布、特多龙料、箱包布等布料。 Mainly used for ordinary nylon cloth, waterproof nylon cloth, Tetolon cloth, bag cloth and other cloths. 手感干爽、牢度好、耐水性、耐磨擦， Dry feel, good fastness, water resistance, abrasion resistance |
|
BE417水性莱卡白色油墨 BE419水性莱卡透明油墨 BE417 water-based Lycra white ink BE419 water-based Lycra transparent ink | 广泛适用于高弹性布料印刷，特别适用于泳装的莱卡布。 水洗、弹性、柔软度均极佳。 Widely used for high elastic fabric printing, especially for swimwear Lycra. Superior washing, elasticity, softness |
|
BE500水性高档罩光油墨 BE500 water-based high-end glaring ink | 高光泽、高丰满度、罩于水性墨表面可显著提升水性墨的美观度和档次。 High gloss, high fullness, covering on the surface of water-based ink can significantly enhance the aesthetics and grade. |
|
BE517水性防水白色油墨 BE519水性防水透明油墨 BE517 water-based waterproof white ink BE519 water-based waterproof transparent ink | 适用于普通尼龙布及高要求的防水尼龙布。 牢度极佳，手感柔软。 Applicable to ordinary nylon and high requirement water proof nylon. Excellent fastness, soft feel |
|
BE207PU烫金浆 BE207PU gilding paste | 适用于高弹面料和高牢度水洗要求的印刷。 一种热塑性的水性树脂。 手感柔软而有弹性、牢度好、光亮度好、不粘手。 Applicable to high elastic fabric and high fastness washing requirement printing A thermoplastic water-based resin Soft feel, good elasticity, good fastness, good brightness and non hand sticky. | 本品使用前先配合1%BE-868A交联剂，充分搅拌，用后随时封闭。 丝网选用80-120目为佳。 用丝网工艺，在织物上印花，待浆干后上铝箔，再经烫压，即得烫金图案。 Before use, fully stir with 1%BE-868A cross-linker and close after use. 80-120mesh screen is preferred. Print the fabric by screen process, cover the aluminum foil after the drying of paste, and the gilding patterns are available after hot pressing.
|
备注：BE417,BE419保质期5℃-30℃通风干燥处2个月；其它产品保质期5℃-30℃通风干燥处6个月。
Note: BE417 and BE419 have the shelf life of 2 months at 5℃-30℃, in dry and ventilated place; other products have the shelf life of 6 months at 5℃-30℃, in dry and ventilated place
附
水性墨配比如下
Attached
Water-based ink ratio is as follows
名称 Name | 印白色（适用比例）White printing (applicable scale) | 印彩色（适用比例）Color printing (applicable scale) | 交联剂 Cross-linker |
BE600高光牛仔浆白色 BE600high-gloss demin paste white | 80%-90% | 60%-70% | 适量 Proper amount |
BE600高光牛仔浆透明 BE600high-gloss demin paste transparent | 20%-10% | 40%-30% |
|
BE 217高档水性PU白色油墨 BE217high-grade water-based PU white ink | 90%-100% | 70%-80% |
|
BE 219高档水性PU透明油墨 BE219high-grade water-based PU transparent ink | 10% | 30%-20% |
|
BE 801水性尼龙白色油墨 BE 801 water-based white ink | 90%-100% | 40%-30% |
|
BE 801水性尼龙透明油墨 BE801 water-based transparent ink | 10% | 60%-70% |
|
BE 417水性莱卡白色油墨 BE417 water-based Lycra white ink | 70%-80% | 60%-70% |
|
BE 419水性莱卡透明油墨 BE419 water-based Lycra transparent ink | 30%-20% | 40%-30% |
|
BE 517水性防水白色油墨 BE517water-based waterproof white ink | 80%-90% | 60%-70% |
|
BE 519水性防水透明油墨 BE519water-based waterproof transparent ink | 20%-10% | 40%-30% |
|
备注：各组水性墨性能不同，需要同组对应使用。（以上仅供参考，用户按需自定）
产品印花场景
Note: Different groups have different water-based ink performances,matching is a must. (The above info is only for reference.)
Product usage scenarios
